Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Battery

Open and lift the bonnet. Next, unscrew the small bolt securing the connector on the negative terminal to remove it and disconnect it from the battery. To remove the positive terminal, simply lift the plastic lever and pull off the connector. Now, remove the panel next to the battery by pulling it towards you, as it is held in place by a couple of clips. Next, detach the clips at the base of the battery that secure the entire battery tray, and also remove the bolts securing the base of the battery.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery in a Peugeot 208 1.2 Puretech
Replacing the Battery in a Peugeot 208 1.2 Puretech
Peugeot 208 (2012-2019 / A9, MK 1) Follow these simple steps to remove the engine battery from a Peugeot 208. First, open the bonnet of your vehicle and disconnect the two battery term…
How to Change the Key Battery of the Peugeot 208
How to Change the Key Battery of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This video shows the simple and quick procedure to replace the key battery of the Peugeot 208. The battery is a CR2032. To replace the key battery, u…
How to Dismantle and Change the Key Battery of the Peugeot 208
How to Dismantle and Change the Key Battery of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) To dismantle the key of the Peugeot 208 and change the battery, first, remove the small cover with the Peugeot emblem using a small flathead screwdri…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos