Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : How to reset the tire pressure sensor of the 2020 Peugeot Partner

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee MK 3 - Years 2018-2024
Part: Instrument cluster
Operation: How to reset the tire pressure sensor of the 2020 Peugeot Partner

If you own a Peugeot Partner Mk3 (year 2020) and want to manually reset the alarm light for the vehicle's tire pressures, you just need to follow these steps. First, enter the interior of the vehicle and insert the key to turn on the instrument panel. Then, move to the central display and enter the menu. Select the option "Define the vehicle parameters" and then press "Security". Finally, select the "Tyre inflation" option and confirm the reset of the light. Once done, turn off the instrument panel.


Posted on 24 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - What does the warning light with the triangle on the Renault Partner mean? Read Answer
    • Partner Tepee 2008-2018 - What does an orange triangular warning light in Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - What does the warning light with the orange triangle on the Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - When does the AdBlue warning light on Peugeot Partner Tepee warn? Read Answer
    • Partner Tepee 2008-2018 - What does the orange triangle light on the Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - What does the urea warning light on the Peugeot Partner mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos