Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Renault Partner

Model: Peugeot Partner Tepee MK 3 - Years 2018-2026
Part: Diesel fuel filter

In this video, you will see how to change the diesel filter on a Peugeot Partner. Open the bonnet and remove the cover from the engine block; the filter is right next to it. Using a small screwdriver, remove the first connector, while for the second, simply push to the right. Next, find the supply pipes that need to be removed by simply sliding them off. Now, unscrew the two bolts that hold the filter at the back. Once done, you can pull it out without difficulty. Let it drain into a suitable container (not directly onto the floor, as it is still diesel) and then repair if possible, or replace the part. It will then be easy to perform the reverse operations for reassembly.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the diesel filter of the Peugeot Partner Tepee 1.6 BlueHDI
How to replace the diesel filter of the Peugeot Partner Tepee 1.6 BlueHDI
Peugeot Partner Tepee (2008-2018 / B9) In this guide we will see the instructions that will allow us to disassemble and replace the diesel filter cartridge of the Peugeot Partner Tepee 1.6…
How to replace the air filter on the Peugeot Partner Tepee
How to replace the air filter on the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Replacing the air filter of the 2016 Peugeot Partner Tepee is a very simple and quick operation for which we must: -open the front hood and cover the…
How to Replace the Air Filter on a Peugeot Partner
How to Replace the Air Filter on a Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) To replace the air filter on a Peugeot Partner, open the bonnet to access the components inside the engine bay. In the centre, just below the windscr…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos