Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to reset the maintenance light on the Peugeot 208 MK2

Peugeot 208 - Video tutorial

Model: Peugeot 208 UP, UB, MK 2, UJ, UW - Years 2019-2024
Part: -board computer
Operation: How to reset the maintenance light on the Peugeot 208 MK2

In this video we see how to reset the maintenance reminder of a Peugeot 208 through the onboard computer: from the multifunction screen we go to the menu, then press "vehicle", go to the "diagnosis" section and then look for the "vehicle status" where we find that maintenance should be done within 700 km. In reality, we have already taken care of it, so now we turn off the ignition, and press the reset button, which on this car is located at the end of the turn signal stalk. Keep it pressed and turn the key to turn on the ignition again. The display will automatically enter a countdown mode: when it reaches zero it will be reset, and that's it.


Posted on 6 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 208 2019-2026 - What are the dashboard indicators of the Peugeot 208? Read Answer
    • 208 2019-2026 - What to do if the multimedia screen of the Peugeot 208 is no longer working? Read Answer
    • 208 2019-2026 - What does it mean if the catalytic converter lights up on the Peugeot 208? Read Answer
    • 208 2019-2026 - What to do when the display of the Peugeot 208? Read Answer
    • 208 2019-2026 - What does the AdBlue error message on Peugeot 208 mean? Read Answer
    • 208 2019-2026 - How to restart the display in the Peugeot 208? Read Answer
    • 208 2019-2026 - What does the ignition of the engine light mean in the Peugeot 208? Read Answer
    • 208 2019-2026 - What problems with the screen of the Peugeot 208? Read Answer
    • 208 2019-2026 - What to do when the Peugeot 208 screen does not work? Read Answer
    • 208 2019-2026 - Why does the smeg of the Peugeot 208 not turn on? Read Answer
    • 208 2019-2026 - Why does the display no longer light up in the Peugeot 208? Read Answer
    • 208 2012-2019 - Why does the on-board computer of the Peugeot 208 1.2 VTi Active not turn on? Read Answer
    • 208 2012-2019 - Why does the Peugeot 208 screen no longer light up? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos