Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Door Seal of a Peugeot 107 Where Water Leaks Inside

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car door

Video tutorial

This video demonstrates how to repair the door seal of a Peugeot 107 where water leaks inside. At first glance, the door closes properly, and there are no signs of forced entry that could allow water to pass through - as it obviously wouldn't close well.

Additionally, over time, the bodywork can flex slightly and compress the seals, which no longer hold as they should. The first step is to ensure the seals are clean, and you can apply some silicone spray to resolve this issue.

If you find that the bottom is sealed but the top is protruding outward, lower the window and push it inward, as shown by the YouTuber. If you need to adjust the lock, you can do so with an empty water bottle, pushing the door to close it. If you need to replace the seal, simply pull it towards you, and it will come off entirely; to refit it, just push it back into place with your hand.

Another common issue is the hinge located at the rear of the tailgate; if the screw starts to come out, it will allow water to enter the tailgate, but you can easily put it back in place.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to Replace the Window Seal on the Citroen C1 - Peugeot 107
How to Replace the Window Seal on the Citroen C1 - Peugeot 107
Peugeot 107 (2005-2014 / MK 1) This guide will show you how to remove and replace the front window seal on the Peugeot 107, as well as the Citroen C1 and Toyota Aygo. First, open t…
…
How to Remove the Right Front Door Panel on Peugeot 107
How to Remove the Right Front Door Panel on Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Remove the right front door panel on the Peugeot 107. Remove the trim plastic above the internal handle and use a screwdriver to take out the screws …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos