Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

If you own a first-generation Peugeot 2008 (2013-2019) and want to learn how to correctly remove the entire rear light assembly, read this guide carefully and follow the described steps. First, park the vehicle safely and turn it off completely.

Next, go to the rear of the car, lift the bonnet, and remove the protective cover located on the side of the boot. At this point, locate and remove the safety hook, then proceed to remove the light after disconnecting the electrical cable connected to it.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light and Replace the Bulbs on Peugeot 2008
How to Remove the Rear Light and Replace the Bulbs on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Are the rear light bulbs on your Peugeot 2008 not working anymore? Follow this guide to remove the light and replace the bulbs: open the boot lid, re…
How to Replace the Rear Exterior Headlamp Bulbs on the Peugeot 2008
How to Replace the Rear Exterior Headlamp Bulbs on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To replace the rear exterior headlamp on the Peugeot 2008, start by opening the boot. Remove the rear cover of the headlamp, unclip the internal clip…
How to Replace the Headlight Bulbs on a Peugeot 2008
How to Replace the Headlight Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) How do you replace the bulbs in the rear light of a Peugeot 2008? This operation is very simple. Open the boot lid, then remove the fabric cover loca…

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - How to disassemble the rear light of the Peugeot 2008? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos