Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Radiator for Maintenance

Model: Porsche 911 996 - Years 1997-2005
Part: Radiator

The rear position of the radiator and its construction do not allow for simple routine maintenance, so it is necessary to remove it in the shop. Position the vehicle on the lift and remove the left rear panel to access the mechanics. Unscrew the screws of the plastic cover that directs air into the radiator and gently remove it to avoid breakage. Unscrew the radiator retaining screws and, being careful of the rigid pipes connected to it, move the radiator until it tilts forward. You can now proceed to clean the inside.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Porsche 911 (1997-2005 / 996) Start by removing the parking lights using a plastic tool. Use long-nose pliers to remove all the plastic clips. Grip the clips by the head and gentl…
Porsche 911 (1982-1991 / ) Need to change the door panel on a Porsche? Let's see how to disassemble it. Use a screwdriver to remove the screws located in the handle lever area …
Porsche 911 (2005-2011 / 997) Annual maintenance costs for the Porsche 911 are somewhat high but are definitely beneficial for the longevity of your vehicle. The cost of the servi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos