Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the engine oil of the Porsche Panamera.

Model: Porsche Panamera 971, MK 2 - Years 2016-2023
Part: Engine oil

Today we will explain how to change the engine oil on a Porsche Panamera 971. It is very important to place a container under the oil reservoir and lift the vehicle on a lift before starting the oil change. Using a T25, we remove the lower bumper cover to gain access to the oil reservoir. We remove the drain plug using a T45. Once the plug is removed, we let the used oil drain into the container. We close the reservoir plug and clean the area before installing the lower cover; it is important to reduce the torque to 18.5 feet-pounds. We open the front hood and remove the engine cover. Next, using a 32 mm socket wrench, we remove the nut that secures the oil filter housing to perform the filter replacement. After replacing the filter, we install the cover of the housing and the engine cover. We open the reservoir cap and pour in about 5 liters of oil.

Posted on 24 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Porsche Panamera (2016-2023 / 971, MK 2) In this new mini guide dedicated to all of you who own a 2019 Porsche Panamera, we will discover the various steps to take in order to independently …
Porsche Panamera (2009-2016 / 970, MK 1) Replacing the key fob battery in the Porsche Panamera is simpler than in many other cars. In this case, you do not need to open the fob casing to acc…
Porsche Panamera (2009-2016 / 970, MK 1) Today, you will learn how to remove and replace the fuel pump on a Porsche Panamera by following the instructions below. First, open the rear doors a…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos