|
Do it yourself
| |||
| ||||
Resetting the TPMS on the Porsche Macan S MK1
Model: Porsche Macan
MK 1
- Years 2013-2024
In this video, we will see how to reset the TPMS warning light on the Porsche Macan S MK1: on this vehicle, the TPMS system is indirect, so there are no direct pressure sensors inside the tires, but it uses the ABS sensors to calculate tire pressure by monitoring the rotation speed of each wheel. A deflated tire has a smaller diameter and therefore rotates faster. After adjusting the tire pressure according to the values indicated by the manufacturer and listed on the label on the driver’s door pillar, turn on the ignition and using the multifunction buttons on the steering wheel, press the "back" button, navigate through the menu to the "TPMS" option, hold the "enter" button for a few seconds, and this will take you to the configuration options: select "tire type." You need to select a tire type different from the one mounted (if you have 20", select 21"); then go back to the same menu and reset the correct value (so go back from 21" to 20" as in the previous example) and exit the menu. Drive for 5 to 10 minutes and the system will recalibrate the new reference values and correct pressures. The warning light will turn off.
Posted on 5 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Porsche Macan
(2013-2024 /
MK 1)
Resetting the TPMS light on the Porsche Macan follows the same steps used for the 2011 Porsche Cayenne and 911. The TPMS light indicates that it is n…
Porsche Macan
(2013-2024 /
MK 1)
This brief guide shows how to reset the PCM multimedia system on the Porsche Macan in simple steps. First, get in the vehicle and turn on the ignitio…
Porsche Macan
(2013-2024 /
MK 1)
After restoring the tire pressure of the vehicle, you need to clear the low pressure warning light on the dashboard. To do this, locate the dial on t…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |