Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Polishing Dull Front Headlamp

Model: Porsche Cayman 987 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

If the headlamps have become dull, you can restore their shine by performing adequate sanding and polishing. Apply masking tape around the headlamp to protect the bodywork from potential abrasions.

Sand the headlamp lens with an orbital sander (to speed up the process, but hand sanding is also acceptable) using very fine sandpaper (2000 or 3000 grit) until the headlamp is uniformly dull (it is recommended to perform this operation wet, by spraying water on the headlamp).

Once sanding is complete, polish the headlamp with a soft pad and appropriate paste; repeat the operation if necessary.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Application of Checkered Adhesive Strips
Application of Checkered Adhesive Strips
Porsche Cayman (2006-2012 / 987) Thoroughly clean the bodywork area where you will stick the strips. Position the strip, securing it with masking tape at several points. Remove part …
Resetting the Service Light on the Porsche Cayman
Resetting the Service Light on the Porsche Cayman
Porsche Cayman (2006-2012 / 987) When the conditions set by the Porsche Cayman control system for oil and filter replacement are met, a message will appear on the display reminding y…
How to Replace the Gear Knob on the Porsche Cayman
How to Replace the Gear Knob on the Porsche Cayman
Porsche Cayman (2006-2012 / 987) First, lift the lower panel. Use a plastic lever to avoid damaging the surrounding trim. Now, lift the centre of the knob with a flathead screwdriver…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos