Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Macan
    4. : How do you reset the tire pressure indicator on the Porsche Macan?

Porsche Macan - Video tutorial

Model: Porsche Macan MK 1 - Years 2013-2024
Part: Checks and maintenance
Operation: How do you reset the tire pressure indicator on the Porsche Macan?

In order to reset the tire pressure warning light on the Porsche Macan, you first need to inflate all four tires to the correct inflation pressure. Once the tires are inflated, you can navigate through the menu on the instrument cluster using the directional controls on the right side of the steering wheel. When the tire voice is displayed, you can select the tires that are installed on the car. This will allow the sensors to read the new pressure values. To ensure accurate readings, you will need to drive at a speed of over 25 km/h.


Posted on 7 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Macan 2013-2024 - How much does the first MOT cost for the Porsche Macan? Read Answer
    • Macan 2013-2024 - How much does the Porsche Macan service cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos