Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 2500
    4. : 1994-2001 (BE, BR, MK 2)

RAM 2500 Years 1994-2001 (BE, BR, MK 2)

RAM 2500 (1994-2001 / BR, MK 2, BE)
How to replace the key battery on a Ram 2500
The Ram 2500 key is characterized by a very simple and minimalist design which simplifies, quite a bit, the operations necessary to replace the button cell …read all…
Posted on 9 December 2022 by ScegliAuto
RAM 2500 (1994-2001 / BR, MK 2, BE)
RAM 2500 brake disc replacement
To change the discs of your RAM 2500 you must first lift the car and remove the rubber. It is then necessary to loosen the two screws of the brake caliper …read all…
Posted on 25 June 2022 by ScegliAuto
RAM 2500 (1994-2001 / BR, MK 2, BE)
Transmission oil filter replacement on 1998 RAM 2500
In this very short video tutorial we are going to see the procedures to replace the transmission oil filter on a 1998 Dodge RAM 2500. To start we open the …read all…
Posted on 13 April 2024 by ScegliAuto
RAM 2500 (1994-2001 / BR, MK 2, BE)
How to remove the wiper motor on the Dodge RAM 2500
In this video tutorial we will see how to disassemble and replace the wiper motor of the Dodge RAM 2500, following these simple steps. First of all we open the …read all…
Posted on 8 April 2024 by ScegliAuto
RAM 2500 (1994-2001 / BR, MK 2, BE)
How to remove the airbag in the Dodge RAM 2500?
In this video tutorial we can see how to remove the passenger side airbag in the first series Dodge RAM 2500. This operation must be carried out with the …read all…
Posted on 23 March 2024 by ScegliAuto
RAM 2500 (1994-2001 / BR, MK 2, BE)
ABS fault interpretation instructions
If the ABS warning light (yellow circle with two lateral semicircles) and also the word BRAKE flashes when the ignition is switched on, there is certainly …read all…
Posted on 6 August 2023 by ScegliAuto
RAM 2500 (1994-2001 / BR, MK 2, BE)
How to replace the diesel filter
This video tutorial shows how to replace the diesel filter on a Dodge Ram. Locate the fuel pump connector and disconnect it. After unscrewing the cap to …read all…
Posted on 31 July 2023 by ScegliAuto
RAM 2500 (1994-2001 / BR, MK 2, BE)
Diagnosis and repair of an engine noise.
This Dodge RAM has some problems with the engine: a double noise (a kind of knock and a ticking) is audible when the engine is running. This noise is …read all…
Posted on 30 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Car stereo (2) Battery (2) Bodywork (2) Key (10) V-belt (1) -board computer (9) Checks and maintenance (6) Bearing (1) Differential (1) Brake discs (3) Rear bench seat (1) Tail light (1) Air filter (5) Cabin air filter (6) Diesel filter (7) Oil filter (1) Grille (2) Accessory Kit (1) Light bulb (2) Side turn signal light bulb (1) Headlight bulb (2) Rear light bulb (2) Antifreeze liquid (1) License plate light (1) Third brake light (1) Engine (2) Gear oil (1) Engine oil (2) Door panel (2) Front bumper (1) Rear bumper (2) Brake pads (3) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (2) Wheel (1) Fuse box (2) Manufacturer's coat of arms (1) Central tunnel (1) Interior blower (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos