Do it yourself
Frequently asked questions about cars and motorcycles

How to remove and replace the cigarette lighter socket in our RAM

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Cigarette lighter

Let's see how to remove the cigarette lighter socket - which is actually a power outlet for most of us - from our car, keeping in mind that the procedure applies to most vehicles. It is advisable to disconnect the battery and remove the corresponding fuse to avoid any problems. Look for the two square holes opposite each other inside the socket (they are the elastic stops). Insert the two-point tool that is part of the Dorman kit that we can purchase (composed of 925 pieces) on Temu with code VC305333 at a price of 12.94 euros (delivery on this platform is free for purchases over 20.00 euros); push inwards and then pull up gently. Disconnect the electrical connector. We can find the new socket also on Temu with code LD1100135 at a price of 1.52 euros. Insert the socket into the housing until you hear a "click" (locks locked), reconnect the battery and the fuse, and the job is done.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

RAM 1500 (2019-2026 / DT, MK 5) Replacing the cigarette lighter in a Dodge Ram 1500 vehicle is a relatively simple operation. Turn off the vehicle and for safety disconnect the nega…
RAM 1500 (2009-2019 / DS, MK 4, DJ) Did you know that the black coloring of your RAM 1500 pillars is just a sticker, and underneath it is painted the same color as the body? That's righ…
RAM 1500 (2019-2026 / DT, MK 5) Today we will explain how to remove the rear seat on a RAM 1500 vehicle. We open the door on the passenger side rear and lift the seat in order to ac…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos