Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Change Light on the Dodge RAM 3500 4x4

Model: RAM 3500 DS, DJ, MK 4 - Years 2009-2019
Part: Service warning light

This guide shows how to reset the engine oil change light on the Dodge RAM 3500 4x4 Mk4. To perform the reset operation, you will also need to use the accelerator pedal. First, with the ignition on, check the system messages for the oil change notification. At this point, turn off and remove the ignition key. Insert the key and turn it to the ignition position. Wait for three beeps and fully press the accelerator pedal. Turn the key and remove it. Wait ten seconds before reinserting it and turning on the ignition to check that the operation has been completed correctly.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Dodge RAM 3500
How to Reset the Oil Light on a Dodge RAM 3500
RAM 3500 (2009-2019 / DS, DJ, MK 4) This mini guide will be very useful for you to easily and independently reset the engine oil change warning light in your Dodge RAM 3500. The first t…
How to Reset the Engine Oil Light on a Dodge Ram 3500
How to Reset the Engine Oil Light on a Dodge Ram 3500
RAM 3500 (2009-2019 / DS, DJ, MK 4) This video tutorial shows the steps to reset the engine oil light on a 2018 Dodge Ram 3500 turbo diesel after performing the necessary maintenance. F…
How to Reset the Service Light on a Dodge RAM 3500.
How to Reset the Service Light on a Dodge RAM 3500.
RAM 3500 (2009-2019 / DS, DJ, MK 4) In this video tutorial, you can see how to reset the maintenance light on a Dodge RAM 3500 by following a few simple steps that will guide you toward…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos