Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the windshield washer pump on a Ram 3500?

Model: RAM 3500 DJ, DS, MK 4 - Years 2009-2019
Part: Pump

To replace the windshield washer pump on the Ram 3500, you need to loosen the screws that secure the inner cover of the right front wheel arch. Once the screws are loosened, you can completely remove the wheel arch and access the components inside. The pump is located in its housing in the reservoir containing the windshield washer fluid. You can simply remove it by pulling it out from inside its housing. After removing it, you can insert the new pump and reassemble the inner cover of the wheel arch.

Posted on 30 April 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the new RAM 3500
Where is the fuse box of the new RAM 3500
RAM 3500 (2019-2026 / MK 5, DT) In this new mini guide of ours dedicated to your brand new RAM 3500 from 2023, we're going to find out where the box containing all the various vehic…
How to locate the fuse boxes and understand their diagrams in a RAM 3500.
How to locate the fuse boxes and understand their diagrams in a RAM 3500.
RAM 3500 (2019-2026 / MK 5, DT) Locating the fuse box of a RAM 3500 pickup truck is quite simple. As shown in the video, we can find the box in the engine compartment, so it will be…
How to replace the rearview mirror on the Dodge Ram 3500?
How to replace the rearview mirror on the Dodge Ram 3500?
RAM 3500 (2009-2019 / DJ, DS, MK 4) In order to replace the rear-view mirror of the Dodge Ram 3500 you must first remove the door panel: to do this you will need to loosen the bolts loc…

Other guides you may be interested in

How to Replace the Battery on a Volkswagen Polo

When your vehicle won't start and makes noises similar to electrical contacts, the cause is likely the battery. Release the bonnet using the appropriate lever and lift it to secure it with the prop rod. First, check the condition of your battery, then disconnect the terminals, starting with the negative one. Next, unclip the brackets securing the battery on both sides, then unscrew the bolts on the sides of the battery base to remove the brackets holding it in place. Install the new battery, and you're done!

Watch the video!


by ScegliAuto

More videos