Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the spare wheel from the Dodge Ram 2500 Mk3

Model: RAM 2500 D1, DM, DR, DC, MK 3, DH - Years 2002-2009
Part: Wheel

The guide shows how to remove the spare wheel of the Dodge Ram 2500 Mk3. To perform this operation, it is necessary to check if the tool kit, present in the vehicle, includes extensions to reach the winch pin of the spare wheel located on the bottom of the frame. Insert two extensions, to avoid damaging the bodywork, into the hole located on the upper right side of the rear plate. Turn the lever counterclockwise to lower the wheel and, when on the ground, remove the fixing block located in the center of the rim. Tighten the winch in position and remount the tools used in the housing under the right front seat.

Posted on 24 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump of the Dodge RAM 2500.
How to replace the fuel pump of the Dodge RAM 2500.
RAM 2500 (2002-2009 / D1, DM, DR, DC, MK 3, DH) Today's procedure will illustrate how to disassemble and replace the fuel pump of the Dodge RAM 2500, following the instructions below. First, we lif…
How to replace the brake pads on the Dodge RAM 2500
How to replace the brake pads on the Dodge RAM 2500
RAM 2500 (2009-2019 / D2, MK 4, DS, DJ) We see in this guide the procedure necessary for the disassembly and replacement of the front and rear brake pads of the Dodge RAM 2500. First we lif…
How to remove the wiper motor on the Dodge RAM 2500
How to remove the wiper motor on the Dodge RAM 2500
RAM 2500 (1994-2001 / BE, MK 2, BR) In this video tutorial we will see how to disassemble and replace the wiper motor of the Dodge RAM 2500, following these simple steps. First of all w…

Other guides you may be interested in

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos