Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cigarette lighter of the Dodge RAM 2500 Mk3.

Model: RAM 2500 DC, MK 3, D1, DR, DH, DM - Years 2002-2009
Part: Cigarette lighter

The guide shows how to replace the cigarette lighter of the Dodge RAM 2500 Mk3. The replacement procedure is very simple and can be easily done using the extraction tool provided with the replacement kit. The first step is to insert the head of the extractor into the cylinder of the cigarette lighter. In fact, inside the piece, there are two small holes that allow the release of the plastic clips for attachment; this operation may require some effort. Once the extractor is inserted, pull with some force while holding the dashboard finishing mask to avoid damaging it. After extracting the cylinder, remove the electrical connector and replace it with the new piece. Slide the cigarette lighter all the way in to engage the two attachment clips. Check for proper functioning.

Posted on 17 July 2023 by ScegliAuto

Video tutorial

Related tutorials

RAM 2500 (2002-2009 / DC, MK 3, D1, DR, DH, DM) Today's procedure will illustrate how to disassemble and replace the fuel pump of the Dodge RAM 2500, following the instructions below. First, we lif…
RAM 2500 (2002-2009 / DC, MK 3, D1, DR, DH, DM) The guide shows how to remove the spare wheel of the Dodge Ram 2500 Mk3. To perform this operation, it is necessary to check if the tool kit, present…
RAM 2500 (2019-2026 / MK 5, DT) In the Dodge Ram 2500, the fuse box in the engine compartment is the only one in the vehicle. It is located between the vehicle's battery and the fro…

Other guides you may be interested in

How to Remove the Gear Knob on a Renault Scenic

Want to replace the gear knob on a Scenic? Let’s see how to do it in this video. First, detach the leather gaiter cover from the edge of the centre console. Use a plastic spatula to remove the cap indicating the gear numbers. Grip the knob and twist it until it comes off the shaft. Disconnect the knob from the gaiter, fit a new one onto the gaiter (if the gaiter is damaged, replace it with a new one) and attach it to the metal shaft. Finally, secure the connectors of the leather gaiter onto the centre console.

Watch the video!


by ScegliAuto

More videos