Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the indicator light of the rearview mirror in the RAM 1500 pick-up truck?

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Side marker light

In this tutorial, we can see how to replace the side mirror turn signal on the RAM 1500 pickup truck, which is an extremely simple and quick operation. First of all, make sure that the key is not inserted, then move the mirror upwards to gain access to its lower slot. Next, locate the clip that secures the turn signal, unlock it using a long flat-tipped screwdriver, and separate the component from the mirror housing. At this point, all that's left is to disconnect the connector and install the replacement by following the reverse procedure.

Posted on 17 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan in the RAM 1500 pickup?
How to replace the cabin fan in the RAM 1500 pickup?
RAM 1500 (2009-2019 / DS, MK 4, DJ) In this tutorial, we can see how to replace the cabin fan in the RAM 1500 pickup, an extremely simple and quick operation. First of all, make sure th…
How to replace the rear taillight on a RAM 1500 pickup truck?
How to replace the rear taillight on a RAM 1500 pickup truck?
RAM 1500 (2019-2026 / MK 5, DT) .. replace the rear taillight on the RAM 1500 pickup truck. For this simple and quick operation, we will need a Torx T25 screwdriver and, of course, the.. …
How to reset the oil service in the RAM 1500 pick-up?
How to reset the oil service in the RAM 1500 pick-up?
RAM 1500 (2019-2026 / MK 5, DT) In this tutorial we can see how to reset the oil service in the RAM 1500 pick-up. Before proceeding with this simple and quick operation, let's make …

Other guides you may be interested in

How to Replace the Front Headlamp on a Fiat Bravo

First, release the bonnet using the lever, then lift it. To remove the headlamp, you will need to dismantle a significant part of the front bumper. Start by removing the inner wheel arch liner to access the screw that secures the bumper to the wing. Next, remove the screws located on the top of the bumper. This will allow you to unscrew all the bolts securing the headlamp, including the one hidden by the bumper. Finally, disconnect the connector at the back of the headlamp and carry out the necessary replacements.

Watch the video!


by ScegliAuto

More videos