Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light bulb on the RAM 1500

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part:

Replacing the third brake light bulb on a Ram 1500 is a very quick operation to perform independently. Unscrew the two screws on the headlight and proceed with disassembly. Disconnect the connector and remove the burnt-out bulb. Insert the new bulb and proceed with reassembly of the headlight. Reconnect the connector and mount the headlight by tightening the two screws. Test the operation of the bulb by turning on the vehicle lights. You can purchase the bulb with the same voltage online on auto parts sales websites or in physical stores in your city, the cost is around €10.00.

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace third brake light on Dodge Ram 1500
How to replace third brake light on Dodge Ram 1500
RAM 1500 (1994-2001 / BR, BE, MK 2) If we need to replace the third rear brake light bulb on this car, we will find instructions on how to behave in this description and we can also hel…
How to replace the third brake lights on the Dodge Ram
How to replace the third brake lights on the Dodge Ram
RAM 1500 (2009-2019 / DS, MK 4, DJ) To change the bulb of the third stop of the Dodge Ram, we start by removing the 4 screws that hold the panel with the lights, remove the panel by fir…
How to change the light bulb on Dodge RAM 1500
How to change the light bulb on Dodge RAM 1500
RAM 1500 (2009-2019 / DS, MK 4, DJ) Let's see how to replace the bulbs on Dodge RAM 1500. Remember that the entire headlight must be removed, so open the tailgate of the trunk and unscr…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos