Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" light on a Renault Clio?

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part: Service warning light

To reset the "Service" light on a Renault Clio, turn on the instrument panel without starting the engine. Once it is on, use the buttons on the steering wheel to access the onboard computer menu. Navigate through the various options displayed on the screen using the selection buttons until you reach the section related to maintenance or service intervals. When you reach the correct menu, locate the option to reset the maintenance intervals. At this point, hold down the confirmation button on the steering wheel for a few seconds, until the system confirms that the reset has been successfully completed. The "Service" light will turn off, indicating that the vehicle has recorded the new maintenance interval. After the reset, turn off and turn on the instrument panel to ensure that the light is actually deactivated. If the problem persists, repeat the procedure, making sure to follow all necessary steps to complete the reset.

Posted on 28 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) When the service light illuminates on the instrument cluster of your Renault Clio Mk3 (2005-2013) despite having already completed the service, you m…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos