Do it yourself
Frequently asked questions about cars and motorcycles

Reset the service light on the Renault Megane Scenic III.

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Service warning light

After replacing the engine oil of the Renault Megane Scenic III, you must reset the notification system, which reminds us to carry out this important operation, by displaying a reminder on the dashboard. Sit in the driver's seat, turn on the instrumentation, use the two small buttons at the top of the lever on the right of the steering wheel to select the maintenance interval on the central display. Press and hold one of the two buttons: we will first see the current indication flashing, then updating and finally the flashing will stop at the end of the reset.

Posted on 1 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) It will be possible to reset the Service light on the instrument panel of the Renault Scenic by turning on the instrument panel, inserting the igniti…
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To manually reset the service light that appears permanently on the instrument cluster of your 2011 Renault Scenic, you do not need a professional's …
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this tutorial, you will see how to reset the service light in the Renault Scenic, a very simple and quick operation, to be done only after complet…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos