Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear light bulb on the Renault Scenic is a very simple operation that can be done independently. The steps to follow are 8. The first step is to open the boot.

The second step is to unscrew the two outer side screws. The third step is to remove the internal cover of the boot to access the light fixing clip.

The fourth step is to remove the light and disconnect the connector. The fifth step is to replace the bulb.

The sixth step is to reconnect the connector and insert the light. The seventh step is to screw in the internal screw and close the cover.

The eighth step is to screw in the two outer screws and close the boot.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Renault Scenic 2
How to replace the rear headlight bulb of the Renault Scenic 2
Renault Scenic (2003-2009 / Scenic 2, MK 2) If you own a Renault Scenic Mk2 and are wondering how to replace the rear headlight bulb, then all you have to do is read the following guide and fol…
How to replace the rear headlight bulb of the Renault Scenic 3
How to replace the rear headlight bulb of the Renault Scenic 3
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the rear headlight bulb of the Renault Scénic model 3, we need to open the trunk and unscrew the three screws located along the side of th…
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today's instructions will allow us to remove and replace the bulbs of the rear headlamp on the Renault Scenic. First, open the rear tailgate of the b…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos