Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Renault Twingo?

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

The Service light that appears on the instrument panel of the Renault Twingo can be reset by inserting the key to turn on the instrument panel: once it is turned on, you will need to press the button located at the end of the lever on the right side of the steering wheel until the icon of the car with the wrench appears on the central display.

At this point, you will need to hold down the button for a few seconds until the Service light is properly reset and the maintenance interval is restored.

You can verify that the reset has been done correctly by turning off and on the instrument panel.


Posted on 8 December 2024 by ScegliAuto


Related tutorials

How to Reset the Service Light in the Renault Twingo?
How to Reset the Service Light in the Renault Twingo?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To reset the service light in the Renault Twingo, insert the ignition key into the lock and turn it to activate the instrument panel: once it is on, …
How to Reset the Service Light on a Renault Twingo 2
How to Reset the Service Light on a Renault Twingo 2
Renault Twingo (2007-2014 / Twingo 2) This video shows how to reset the maintenance light on the Renault Twingo 2. The procedure is simple and takes less than 1 minute. To reset this ligh…
How to Reset the Service Light on a Renault Twingo?
How to Reset the Service Light on a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) You can reset the Service light displayed on the instrument panel of the Renault Twingo by inserting the ignition key to activate the instrument pane…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos