Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs of the Renault Twingo MK2

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

In this video we can see how to replace the rear lights of the Renault Twingo MK2: we open the rear trunk of the car and remove the screw located on the inside of the trunk, corresponding to the rear light. We remove the closing screw and push back the tab, which will allow us to extract the light block by pulling it outwards.

We separate the two plastic tabs in order to remove the part with the electrical connectors and remove the faulty bulb, always remembering not to touch the bulb with bare fingers, as this will significantly shorten its lifespan. We put the new one back in place and put the plate with the connectors back in its compartment.

We position the optical group back in place and reconnect the gasket, securing the clip in the trunk with the key. Operation completed.


Posted on 21 December 2024 by ScegliAuto


Related tutorials

How to Replace the Side Lights in a Renault Twingo?
How to Replace the Side Lights in a Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) In this tutorial, you will see how to replace the bulbs for the side lights in a Renault Twingo, a very simple and quick operation. Before proceeding…
How to Replace the Headlight Bulbs on a Renault Twingo?
How to Replace the Headlight Bulbs on a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) As shown in this tutorial, replacing the headlight bulbs on a Renault Twingo is an extremely simple and quick operation. First, ensure the key is not…
Replacing Front Headlight Bulbs on Renault Twingo
Replacing Front Headlight Bulbs on Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Lift the bonnet and insert the support rod. Replacing the front headlight bulbs is very simple: for most of them, just remove the rear cover (inside …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos