Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the side door of the Renault Master?

Model: Renault Master MK 2 - Years 1997-2010
Part: Car door

The sliding side door of a van, and this applies to any brand of van, over time and especially with intense use, may tend to not work properly on its track, causing problems in closing and opening. With a few tools and a few minutes of time to dedicate, the problem is solvable by yourself, exactly as indicated and shown in the video available here. You must adjust the forward, backward, right and left adjustment of the brackets that connect the door to the body, in order to make it perfectly align with the lock, specifically, for closing.

Posted on 10 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the side door of the Renault Master.
How to adjust the side door of the Renault Master.
Renault Master (2010-2023 / MK 3) After many uses, it may happen that the side door of the Renault Master van does not close properly or comes off the track. In these cases, it is nec…
How do you adjust the sliding door of the Renault Master?
How do you adjust the sliding door of the Renault Master?
Renault Master (1997-2010 / MK 2) In order to adjust the sliding door on the Renault Master, you need to open it to locate the screws that are located at the hinges. Once you have ide…
How to set the time on the Renault Master
How to set the time on the Renault Master
Renault Master (1997-2010 / MK 2) In a few simple steps, we will see how to adjust the time on the instrument panel of the Renault Master. First of all, we get on board the vehicle an…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos