|
Do it yourself
| |||
| ||||
How do you remove the steering wheel and airbag of the Renault Clio IV?
Model: Renault Clio
Clio IV, MK 4, Clio 4
- Years 2012-2019
In this video, we can see how to disassemble the steering wheel and airbag of the Renault Clio IV: first, we will need to remove the airbag. To do this, we will need to turn the steering wheel all the way to the right, and with a small screwdriver, enter the hole at the bottom of the steering wheel. This will release the spring that holds the airbag on that side. We do the same thing by turning the steering wheel all the way to the other side; here we will find another hole, where we will insert the screwdriver and release the other spring. Now straighten the steering wheel and lift the airbag. Disconnect the electrical connector and the airbag is removed. With a ratchet screwdriver of the appropriate size, now we unscrew the large screw that connects the steering wheel to the steering column. Lift the steering wheel, and there you have it.
Posted on 17 January 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
In this video tutorial, you will learn how to disassemble and replace the airbag and steering wheel of the Renault Clio, following the instructions b…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
This guide shows how to remove the steering wheel airbag on a Renault Clio. Before removing the steering wheel, disconnect the car's power terminals.…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
How do you remove the airbag and steering wheel from a Renault Clio? Before removing the steering wheel, disconnect the battery terminals located in …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.159
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |