Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Twingo
    4. : How to reset the service oil warning light and other warning lights in the new Renault Twingo

Renault Twingo - Video tutorial

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Dashboard
Operation: How to reset the service oil warning light and other warning lights in the new Renault Twingo

First of all it is necessary to turn on the ignition by turning the key. At this point we have to press the button, located in the upper end of the lever with which the wipers are activated. This operation must be carried out for a number of times such that, on the dashboard (on the left), the "SET" light flashes and, subsequently, the various indications appear until the light indicating the mileage and the need for check and, if necessary, add oil to the engine. After that it is necessary to keep the same button pressed for the time necessary for the same "service oil" light to flash and be reset accordingly. To reset the other lights relating to other functions, proceed in the same way.


Posted on 16 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Twingo 2014-2023 - What do the warning lights in the dashboard of the Renault Twingo mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos