Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the front bumper of a Renault Clio?

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Front bumper

See other generations:
Video tutorial

To remove the front bumper of a Renault Clio, start by turning off the engine and making sure the vehicle is on a flat surface. Open the hood and locate the screws and bolts that secure the bumper, usually located along the top and bottom edges, as well as in the wheel arch cavities.

Use a screwdriver and an Allen key to remove these screws and bolts. Next, remove any plastic fastening clips that may be present, using a clip tool or a flat-head screwdriver.

Once all the screws, bolts, and clips have been removed, carefully grip the bumper on the sides and gently pull it towards you to release it from the supports. Pay attention to the electrical connectors for fog lights or other devices integrated into the bumper; disconnect them carefully.

After releasing and disconnecting everything, remove the front bumper from the car. To reassemble it, follow these steps in reverse order, making sure all connections are secure and all screws, bolts, and clips are properly fastened.


Posted on 6 February 2025 by ScegliAuto


Related tutorials

Renault Clio (1998-2005 / MK 2, Clio 2) In this tutorial we can see how to remove the front bumper on the Renault Clio, a very simple and quick operation. First, we open the hood, then we u…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Do you want to remove the front headlight of a Renault Clio? Let's see how to disassemble the front headlight. Before removing the front headlight, y…
Renault Clio (1998-2005 / MK 2, Clio 2) Today we will see the instructions on how to disassemble and replace the front headlight of the Renault Clio. First of all, we open the hood of the c…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos