Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the handbrake cable of the Renault Master?

Model: Renault Master MK 2 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Parking brake

See other generations:
Video tutorial

In order to replace the handbrake cable of the Renault Master, it will be necessary to lift the vehicle using a jack or a bridge, in order to access the components located in the lower part of the vehicle: once the cable ends have been identified here, it will be possible to loosen the nuts that secure these ends to the corresponding attachments.

At this point, it will be possible to remove the old cable from its housing so that the new one can be inserted: once this has been inserted, it will be possible to secure the ends and check the operation.


Posted on 21 February 2025 by ScegliAuto


Related tutorials

Guide to replacing the rear brake pads on the Renault Master
Guide to replacing the rear brake pads on the Renault Master
Renault Master (2010-2023 / MK 3) This guide will show you the main steps to remove and replace the rear brake pads on the Renault Master. First, lift the vehicle and remove the rear …
How to Replace the Gear Knob on a Renault Master
How to Replace the Gear Knob on a Renault Master
Renault Master (2010-2023 / MK 3) The gear knob in your Renault Master (2010-2021) is one of the most frequently used components and is therefore subject to wear over time. To replace…
How to Replace the Rear Brake Pads on the Renault Master?
How to Replace the Rear Brake Pads on the Renault Master?
Renault Master (2010-2023 / MK 3) To replace the rear brake pads on the Renault Master, lift the vehicle so that the rear wheel is not in contact with the ground: after lifting the ve…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos