Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the electronic handbrake of the Renault Scenic?

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Parking brake

The electronic handbrake of the Renault Scenic can be reset by turning on the instrument panel, after the ignition key has been inserted into the corresponding block: once the instrument panel is turned on, you can remove the dashboard protection panel located at the bottom left of the steering column. Below this, you will find a lever, which must be pulled all the way down for a few moments; by performing this operation, you will notice that the handbrake error message will be reset and the handbrake will be restored.

Posted on 16 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to manually release the electronic handbrake on the Renault Scenic
How to manually release the electronic handbrake on the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this video we can see how to disengage the electronic handbrake in case of emergency, on the Renault Scenic. In fact, as the YouTuber says, the el…
How to Reset the Handbrake on the Renault Scenic 3?
How to Reset the Handbrake on the Renault Scenic 3?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) If the electronic handbrake on your Renault Scenic 3 is stuck, simply due to a temporary electronic error, you can attempt a DIY reset, all in an eas…
How to Release the Handbrake on a Renault Scenic
How to Release the Handbrake on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) To manually release the handbrake on a Renault Scenic, note that if you try to press the button and pull the lever, the handbrake does not release. N…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos