Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset an error in the Renault Trafic 3, which prevents its use?

Model: Renault Trafic MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

It could happen that in your vehicle, for example the Renault Trafic 3 that we are talking about now, an error light may come on and remain in memory, not allowing us to use the vehicle. The light that has appeared here is the adblue light, which is the additive used in new generation diesel vehicles to reduce emissions.

Before going to the workshop, it is good to do a simple test, which is to open the fuse box, located to the left of the steering wheel, at the bottom, and disconnect the appropriate fuse, identifiable thanks to the fuse diagram, and reconnect it after a few seconds.

This will generate a reset that should solve the problem.


Posted on 24 April 2025 by ScegliAuto


Related tutorials

How to reset the AdBlue refill warning on the Renault Trafic
How to reset the AdBlue refill warning on the Renault Trafic
Renault Trafic (2014-2026 / MK 3) The following steps will allow us to reset the AdBlue fluid refill warning on the Renault Trafic; before resetting the warning light, it is necessary…
How to reset the AdBlue warning light on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) If the AdBlue warning light on the Renault Trafic remains on even after refilling with the additive, it is possible that a programming error has occu…
How do you reset the AdBlue warning light on the Renault Trafic?
How do you reset the AdBlue warning light on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) It will be possible to reset the AdBlue warning light of the Renault Trafic by first performing a top-up with the necessary amount of additional flui…

Other guides you may be interested in

    Frequently Asked Questions

    • Trafic 2014-2027 - Where is the inertia switch located in the Renault Trafic van? Read answer
    • Trafic 2014-2027 - Why does the Start and Stop of a Renault Trafic not work? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos