Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the wheel on a Renault Megane

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Wheel

Let's see how to change the wheel on a Renault Megane: we open the luggage compartment and take the wheel removal kit which includes: jack, jack lever, screwdriver, bolt wrench (if present), telescopic wrench, spare wheel. We position the jack under the grip point of the car, that is under the most rigid part of the frame in order to bend the sheet metal due to the too much weight, lift the car a little and loosen the wheel pins. We lift the car with the jack lever, unscrew the pins and pull the wheel away from the hub seat. We mount the new rim on the hub (the spare wheel is positioned under the car body, bring it to the ground with the handy kit placed in the luggage compartment) with the respective pins.

Posted on 30 July 2019 by ScegliAuto

Video tutorial

Related tutorials

How to replace a wheel on a Renault Megane.
How to replace a wheel on a Renault Megane.
Renault Megane (2008-2015 / Megane 3, Megane III) In this video, we see how to replace a wheel on the Renault Megane sedan. We open the rear door to access the spare wheel located under the rear trun…
How to replace the accessory belt on the Renault Megane III
How to replace the accessory belt on the Renault Megane III
Renault Megane (2008-2015 / Megane 3, Megane III) In this video we see how to change the drive belt on the Renault Megane II: from the first drawing we can see the correct arrangement of the drive be…
Replacing the timing belt of the Renault Megane 2 1.5 DCI
Replacing the timing belt of the Renault Megane 2 1.5 DCI
Renault Megane (2002-2010 / Megane 2) Today we will see, in this guide, the main steps that will allow us to change the timing belt of the Renault Megane second series, with a 1.5 DCI eng…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos