Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear taillight of the Renault Master

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tail light

See other generations:
Video tutorial

In this video, we can see how to replace the rear light of the Renault Master: we open the rear door and see that on the side, at the bottom, there is a small grille that allows us to access the screws that hold the light in place, and the power cable of the light, which we disconnect in order to remove it easily.

We can find the replacement part, for example, on Amazon with the code B0BGXRTHNZ at a price of 49.99 euros, with free delivery: specify if it is the right or left side.

We proceed in reverse to put the new piece back in place and then do not forget to reposition the grille to protect the inspection hole.


Posted on 10 May 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light of the Renault Master
How to Replace the Rear Light of the Renault Master
Renault Master (1997-2010 / MK 2) This guide explains how to replace the rear light of the Renault Master mk2. To carry out this task, you will need a 30mm Torx key, an electrical con…
Replacement of the rear taillight of the Renault Master MK4
Replacement of the rear taillight of the Renault Master MK4
Renault Master (2010-2023 / MK 3) If we need to replace the rear light of the Renault Master, let's see how to proceed. We open the rear door, on the pillar corresponding to the light…
How to replace the rear headlight bulb of the Renault Master
How to replace the rear headlight bulb of the Renault Master
Renault Master (2010-2023 / MK 3) If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos