Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the 2019 Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part:

Adjusting the tire pressure on a 2019 Renault Captur vehicle is a simple and quick operation to be carried out independently. We remind you that before resetting the warning light, we must adjust the tire pressure following the instructions on the label located on the driver's side door panel from the manufacturer. To perform this operation, we must press the menu button on the steering wheel to access the various vehicle settings; then we select the "tire pressure" option and, while holding down the OK button, update the pressure.

Posted on 11 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on a Renault Captur
How to reset the TPMS light on a Renault Captur
Renault Captur (2019-2026 / MK 2) The TPMS warning light comes on in a Renault Captur when it is necessary to adjust the tire pressure. Once the tire pressure has been adjusted, follo…
How to reset the TPMS light on the Renault Captur.
How to reset the TPMS light on the Renault Captur.
Renault Captur (2013-2019 / MK 1) Let's turn on the dashboard of the Renault Captur to reset the tire pressure warning light. Press the down arrow button to access the vehicle setting…
How to reset the TPMS light on the Renault Captur.
How to reset the TPMS light on the Renault Captur.
Renault Captur (2019-2026 / MK 2) Today we will see how to reset the tire pressure sensors on a Renault Captur vehicle. Before performing the reset of the warning light, it is importa…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos