Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light bulbs in the Renault Espace?

Model: Renault Espace MK 4 - Years 2002-2014
Part: License plate light

In this tutorial we can see how to replace the license plate light bulbs in the Renault Espace, a very simple and quick operation. First of all, make sure that the key is not inserted, then open the rear door and lift it slightly. Next, locate the clip along the inner side edge of the light in question, unlock it with a flat-tipped screwdriver and remove the light from its support. At this point, all that remains is to disconnect the power connector, replace the bulb, reassemble everything and, if necessary, repeat the operation on the opposite side.

Posted on 22 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Renault Espace
How to Replace the Rear Light Bulb on a Renault Espace
Renault Espace (2002-2014 / MK 4) Before starting, open the rear tailgate of your Renault Espace. Begin by unscrewing and removing the screws that secure the light unit to the vehicle…
How to replace the rear light and bulbs on a Renault Espace
How to replace the rear light and bulbs on a Renault Espace
Renault Espace (2015-2022 / MK 5) Today we will discover the instructions that will allow us to remove the rear light and its bulbs on a Renault Espace. First, open the tailgate and s…
How do you reset the tire pressure warning light on the Renault Espace?
How do you reset the tire pressure warning light on the Renault Espace?
Renault Espace (2015-2022 / MK 5) To reset the tire pressure warning light on the Renault Espace, you need to inflate the tires to the correct pressure value: this value is indicated …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos