Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the diesel filter of the Renault Trafic 3

Model: Renault Trafic MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Diesel fuel filter

See other generations:
Video tutorial

Today we will explain how to replace the diesel filter of the Renault Trafic model 3. The filter box is located behind the engine, so in order to replace it, it is necessary to lift the vehicle on stands. Disconnect the electrical connection of the filter and using a socket wrench with a 10 mm insert, unscrew the screw that secures the filter ring.

Open the clamp and remove the water pressure sensor connector from the guide. Disconnect the pipes by pushing from one side to the other on the white parts and remove the filter from the clamp.

Insert the new filter inside the box, screw the water presence sensor onto the filter. Connect the filter to the sensor and connect the pipes, tighten the screw on the clamp and activate the electrical connection.

Lower the vehicle to the ground after completing the replacement procedure.


Posted on 12 August 2025 by ScegliAuto


Related tutorials

Renault Trafic (2001-2014 / MK 2) To replace the diesel filter on the Renault Trafic, open the bonnet, locate the diesel filter behind the headlamp on the passenger side (behind the s…
Renault Trafic (2014-2026 / MK 3) The author of this video shows us quickly but thoroughly where some important elements of the Renault Trafic phase 3 are located. In particular, this…
Renault Trafic (2001-2014 / MK 2) The steps to replace the diesel filter on a Renault Trafic model 2 are straightforward to perform independently. Start by opening the bonnet and usin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos