Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace steering column head of the Renault Clio II.

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we can see how to change the steering tie rods of a Renault Clio II: we lift the vehicle at its front, and remove the front wheels: right behind the disc we will find the tie rod, which we will unlock with WD-40: we make a mark with a marker between the tie rod and the steering tie rod, in order to reposition it in the same place, then we unscrew the tie rod, counting and noting the necessary turns to remove it. Now we position the new tie rod, making it do the same turns as the old one to position it in the same place where the old one was: it should coincide with the mark we made on the tie rod, then tighten it at the bottom, tightening it to 37 Nm; on the tie rod side we will tighten to 18 Nm. We do the same on the other side and reassemble the wheels.

Operation completed.


Posted on 2 September 2025 by ScegliAuto


Related tutorials

How to Disable Traction Control on the Renault Clio?
How to Disable Traction Control on the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To disable the traction control on the Renault Clio, connect the diagnostic tool to the OBD port of the vehicle, located below the steering column. O…
How to Disable Traction Control on the Renault Clio?
How to Disable Traction Control on the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To disable the traction control on the Renault Clio, open the fuse box located inside the cabin, at the lower left of the dashboard relative to the s…
How to Disable Traction Control on the Renault Clio?
How to Disable Traction Control on the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To disable the traction control on the Renault Clio, connect a diagnostic tool to the vehicle's OBD port. Once connected, select the specific car mod…

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos