|
Do it yourself
| |||
| ||||
How to replace the rear shocks on a Renault Clio III
Model: Renault Clio
MK 3, Clio 3, Clio III
- Years 2005-2013
Let's see how to replace the rear shock absorbers of the Renault Clio III: loosen the wheel nuts, lift the car and remove the wheel. Unscrew the upper nut: in the trunk, lift the mat, and you will find a plastic cap that hides the top of the shock absorber. Open it and inside you will find a nut that needs to be completely unscrewed. Under the car, locate the lower bolt that secures the base of the shock absorber to the rear arm. This bolt is often very tight and may be rusted. It is advisable to spray a loosening agent and use a lever to loosen it. At this point, the shock absorber is free. It may be necessary to slightly compress it to remove it from its seat. We can find the new shock absorbers on E-Bay with the code 177317176467 at the price of 102.36 euros with free delivery. Clean the mounting seat, especially the lower one, align the new shock absorber and insert the lower bolt, screwing it by hand; then do the same with the upper one. With the shock absorber installed but the car still lifted, tighten the lower bolt to 70/90 Nm and the upper one to 25/40 Nm. Put the trunk back in place, remount the wheel, lower the car and tighten the nuts. Remember that shock absorbers are always replaced in pairs.
Posted on 12 September 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
As we can see in this video, removing the cover of the third brake light from a Renault Clio III is a rather simple operation. If we open the rear ha…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
Disassembling the rear light of your Renault Clio Mk3 is very simple and to complete the operation you just need to follow a few simple steps. Let's …
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
In this video, we will see how to change the rear suspension spring of the Renault Clio III: we need to lift the rear of the vehicle and remove the r…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.334
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |