Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the cabin fan of the Renault Twingo.

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Blower motor

The instructions in this guide will show us how to disassemble and replace the cabin fan of the Renault Twingo. First, we get on board the car and start removing the plastic cover located on the top of the dashboard; then we remove the cover of the air vents, as shown in the video. At this point, we unscrew the screws of the cabin fan, disconnecting the electrical wiring to remove it; we carry out the repair or replacement of the fan, fixing it correctly, reassembling all the dashboard elements and checking its operation!

Posted on 22 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the cabin fan of the Renault Twingo
How to disassemble the cabin fan of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Below we will see the instructions that will allow us to disassemble and replace the cabin fan of the Renault Twingo. First of all, we get on board t…
Replacement of the cabin fan resistor of the Renault Twingo
Replacement of the cabin fan resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this guide we will see the information related to disassembly and replacement of the cabin fan resistor of the Renault Twingo. First, we get on bo…
How do you replace the cabin fan of the Renault Twingo?
How do you replace the cabin fan of the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) In order to replace the cabin fan of the Renault Twingo, you need to remove the protective panel located on the upper part of the dashboard, on the p…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos