Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Twingo
    4. : How to disassemble the air vents of the Renault Twingo

Renault Twingo - Video tutorial

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Air Vents
Operation: How to disassemble the air vents of the Renault Twingo

We will see below the instructions which will allow us to disassemble and replace the air vents of the Renault Twingo. First of all, we get on board the car and start disassembling the plastic cover of the instrument panel, which we find on the central part of the dashboard; then unscrew the screws of the panel to remove it, disconnecting the electrical connector, as illustrated in the video. Now let's disassemble the passenger airbag cover, subsequently removing the central air vents; let's replace them with new ones and reassemble all the dashboard components!


Posted on 30 April 2023 by ScegliAuto



How to disassemble the starter motor of the Renault Twingo.
Renault Twingo (2014-2023 / Twingo 3, Twingo III) Below we will see the instructions that will allow us to disassemble and replace the starter motor of the Renault Twingo. First, we open the engine h
How to replace the air filter of Renault Twingo 1.
Renault Twingo (1993-2007 / Twingo 1) If you want to replace the air filter on your Renault Twingo Mk1 by yourself but don't know how to do it, don't worry because in this new guide you w
How to disassemble the heating controls of the Renault Twingo.
Renault Twingo (1993-2007 / Twingo 1) Today's guide will show us the useful steps to disassemble and replace the heating and air conditioning controls of the Renault Twingo. First, we get

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos