Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset a tire pressure warning on the Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part:

Let's see how to reset the tire pressure warning on the Renault Captur: first adjust the pressure of all tires to the recommended values, which can be found on a sticker located on the driver's side door pillar. Turn on the instrument panel and use the lever on the right side of the steering wheel to navigate the display, until you find the option "tire pressure adjustment" and press and hold the upper button on the lever for a few seconds. Wait for the confirmation: "adjustment started". At this point, the warning light on the dashboard should turn off and the system will begin to re-learn the new reference pressures.

Posted on 28 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Renault Captur?
How to reset the tyre pressure warning light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the tyre pressure warning light on the Renault Captur, first inflate all the tyres to the correct pressure value: once they are inflated, yo…
How to Reset the Service Light on a 2020 Renault Captur
How to Reset the Service Light on a 2020 Renault Captur
Renault Captur (2019-2026 / MK 2) If you want to manually clear the service light that comes on every time you start your 2020 Renault Captur, follow these instructions carefully. Fir…
How to reset the service light on the Renault Captur
How to reset the service light on the Renault Captur
Renault Captur (2019-2026 / MK 2) After replacing the engine oil, it will be necessary to reset the service maintenance light; let's see the reset procedure on the Renault Captur. Fir…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos