|
Do it yourself
| |||
| ||||
How do you remove the rearview mirror from the interior of the Renault Megane 2?
Model: Renault Megane
Megane 2
- Years 2002-2010
The Renault Megane 2, for which we have a video presentation here, is equipped with an internal rearview mirror installed, as is often the case for many of them, using a very common method in cars in general. If there is cloudiness due to the age of the mirror, or if it has broken for any reason, it is possible to replace it yourself with a new one, taking little time and without much effort. Since the latter is installed by sliding it onto a rail glued to the windshield, to remove it we will need to grasp it and forcefully pull it off the aforementioned rail, taking it away. Job done.
Posted on 25 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Megane
(2008-2015 /
Megane 3, Megane III)
Replace the interior rearview mirror of the Megane? Disassemble the plastic covers around the base of the mirror (if present), then take the mirror p…
Renault Megane
(2015-2023 /
Megane IV, Megane 4)
In today's video tutorial we will see the instructions that will allow us to remove the interior rear-view mirror on a Renault Megane fourth series. …
Renault Megane
(2002-2010 /
Megane 2)
Below we will see the necessary steps on how to disassemble and replace the external rearview mirror of the Renault Megane. First, we open the front …
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
