|
Do it yourself
| |||
| ||||
How to set the car radio of the Renault Twingo.
Model: Renault Twingo
Twingo 2
- Years 2007-2014
On your Renault Twingo, the radio settings are managed from the central panel or the display, depending on the version. With the ignition turned ON and the radio active, open the menu as shown in the video and select the Radio/Audio area. From here, you can search for stations (scan/seek or manual search), save them to presets by holding down the numeric/preset button on the screen, and adjust audio settings (such as bass, treble, balance/fader, and Loudness mode if available). In the advanced settings, you will also find options for RDS, text information, AF/TA, and source selection (FM/DAB/AUX/Bluetooth) when available. Finally, check that the presets have been saved and return to the Settings menu to confirm your preferences for volume, equalization, and default source as seen in the video. If your Twingo's interface uses a tile display with steering wheel controls, you can navigate the same options using the up/down/OK buttons or the side dial; in the case of a basic radio, access to submenus is done via physical buttons.
Posted on 10 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Twingo
(1993-2007 /
Twingo 1)
Below, we will outline the procedure to unlock the standard radio of the Renault Twingo, specifically unlocking the radio stations. First, get inside…
Renault Twingo
(1993-2007 /
Twingo 1)
To unlock the radio on a Renault Twingo, insert the specific U-shaped keys into the holes on the radio's fascia. This will allow the device to be ext…
Renault Twingo
(2007-2014 /
Twingo 2)
Below we will see the steps that will allow us to disassemble and replace the standard radio of the Renault Twingo. First, we get into the car and st…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.179
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |