|
Do it yourself
| |||
| ||||
How to Change Engine Oil and Oil Filter on a Renault Scenic III
Model: Renault Scenic
Scenic 3, MK 3, MK III, Scenic III
- Years 2009-2015
To carry out this operation, first open the bonnet and unscrew the oil filler cap (this will help drain the old oil more easily). If you decide to use a cleaner (like LiquiMoly ProLine, available on Amazon with code B001CZSG94 for £16.48 with free delivery for Prime customers), add it and let the engine idle for 10-15 minutes. Raise the front of the vehicle, remove the plastic undertray from under the engine, position a collection bucket under the oil sump (you will later dispose of oil and filter at an authorised centre), and using a square key, unscrew the drain plug and let it drain completely. The oil filter is located at the top of the engine: place a container to catch the residual oil from the filter and, using a filter key, unscrew it counter-clockwise and remove it. Lubricate the seal of the new filter with clean oil and screw it in by hand until it makes contact, then tighten it half a turn. Now replace the sump plug and lower the vehicle after reattaching the undertray. Pour 90% of the oil through the upper cap and close it. Start the engine for 30 seconds to fill the filter, turn it off and wait a minute. Check the oil level with the dipstick and add a little oil at a time until the level reaches just below the "max" mark.
Posted on 24 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Scenic
(2009-2015 /
Scenic 3, MK 3, MK III, Scenic III)
Learn how to replace the engine oil in the Scenic 3. Lift the front bonnet to access the oil filter. Raise the car on a column lift or jack, then use…
Renault Scenic
(2003-2009 /
MK 2, Scenic 2)
The procedure illustrated in this guide will show us how to perform the regular maintenance check, replacing the engine oil and oil filter, of the Re…
Renault Scenic
(2003-2009 /
MK 2, Scenic 2)
Today, in this short video, we will see how to change the oil and the engine filter on our Renault Scenic. It's not a very complex operation; just be…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.931
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |