Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Koleos

Model: Renault Koleos MK 2 - Years 2016-2024
Part: Service warning light

In this article, we will see how to reset the service light on a Renault Koleos. It is advisable to perform this operation only after having the vehicle serviced. To reset the light, first turn on the ignition without starting the engine. After turning on the ignition, use the navigation button located on the right side of the steering wheel to navigate to the service interval option. Once located, press and hold the OK button for 2 seconds to confirm. At this point, the service interval will appear, then press the OK button again and hold it to perform the reset. Keep it pressed until the display shows the message 10,000 km/12 months, then release the button and verify that the message remains correct; if not, repeat the reset procedure.

Posted on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Renault Koleos?
How do you reset the Service light of the Renault Koleos?
Renault Koleos (2008-2015 / MK 1) To reset the Service light of the Renault Koleos, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot:…
How do you reset the Service light of the Renault Koleos?
How do you reset the Service light of the Renault Koleos?
Renault Koleos (2008-2015 / MK 1) To reset the Service light that appears on the instrument panel of the Renault Koleos, you need to turn on the instrument panel by inserting the key …
How do you reset the Service light on the Renault Koleos?
How do you reset the Service light on the Renault Koleos?
Renault Koleos (2016-2024 / MK 2) The Service light that appears on the instrument panel of the Renault Koleos can be reset by turning on the panel after inserting the appropriate ign…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos