Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Renault Megane?

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

See other generations:
Video tutorial

From the instrument cluster of the Renault Megane, you can clear the Service light by turning on the instrument cluster, inserting the ignition key into the appropriate slot: once the instrument cluster is activated, repeatedly press the button located on the left side of the cluster, under the speedometer.

When the message indicating that the engine oil needs to be replaced appears, hold the button down for a few seconds to clear the light; at the end of the reset procedure, you can turn off the cluster by removing the key.


Posted on 29 June 2026 by ScegliAuto


Related tutorials

Renault Megane (2002-2010 / Megane 2) Today, see how to reset the service light for the engine oil change on the Renault Megane. First, get inside the vehicle and turn on the instrument c…
Renault Megane (2008-2015 / Megane III, Megane 3) This guide provides step-by-step instructions to reset the service light for the regular maintenance oil change on the Renault Megane. First, get in …
Renault Megane (2015-2023 / Megane IV, Megane 4) The method to reset the service light on a Renault Megane, specifically the Renault Megane 3, is explained here: Switch on the instrument cluster. Us…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - How do you reset the Renault Megane Service warning light? Read answer
    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos