|
Do it yourself
| |||
| ||||
How to replace the wiper motor on the Renault Clio II
Model: Renault Clio
MK 2, Clio 2
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
Let's see how to replace the wiper motor on the Renault Clio II: the motor is located under the bonnet on the right side, mounted on the washer fluid reservoir and has two outlets: one for the windscreen and one for the rear window. The video shows a quicker method than the traditional one, which requires removing the wipers, the ventilation grille, and finally accessing the reservoir where you need to disconnect the hoses and the electrical connector. Here we see that the YouTuber had previously made a cut in the inner wing and accessed laterally, without moving the wipers and the grille. It is a very useful method if you want to avoid disassembling many components. After replacing the motor (Amazon code B0CHF8SFRG at the price of £14.99, free delivery for Prime customers), perform a test before reassembling everything; check for any leaks and take the opportunity to clean the jets, which are often clogged. Take the chance to adjust the direction of the jets with a pin.
Posted on 1 August 2026 by ScegliAuto
Related tutorials
Renault Clio
(1998-2005 /
MK 2, Clio 2)
In today's video, we will see the main instructions that will allow us to dismantle and replace the starter motor on the Renault Clio 1.2 8V petrol. …
Renault Clio
(2012-2019 /
Clio IV, Clio 4, MK 4)
This guide will show you the procedure for removing and replacing the starter motor on a Renault Clio 1.5 dCi. First, open the bonnet and disconnect …
Renault Clio
(1998-2005 /
MK 2, Clio 2)
Today's instructions will show us how to disassemble and replace the starter motor of the Renault Clio. First, we open the engine hood of the car and…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |