Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part:

Let's see how to reset the tyre pressure light on a Renault Captur. To reset the tyre pressure warning light, turn on the vehicle's instrument cluster with the key, use the buttons on the lever to the right of the steering wheel, then, once in the settings menu, scroll using the up/down button until you find "Reset Tyres". Select it with the end lever keypad (press and hold) to turn off the tyre pressure warning light and exit the settings menu. Check the instrument cluster by turning it off and on again with the ignition key.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure light in a Renault Captur?
How to reset the tyre pressure light in a Renault Captur?
Renault Captur (2019-2026 / MK 2) In this tutorial, we can see how to reset the tyre pressure light in a Renault Captur, a very simple and quick operation, to be carried out only afte…
How to Reset the Tyre Pressure Light on a Renault Captur
How to Reset the Tyre Pressure Light on a Renault Captur
Renault Captur (2013-2019 / MK 1) Before starting, adjust the tyre pressures, then sit in the driver's seat and activate the instrument panel of your Renault Captur. Begin by repeated…
How to Reset the Tyre Pressure Warning Light on the Renault Captur?
How to Reset the Tyre Pressure Warning Light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the tyre pressure warning light on the Renault Captur, first inflate the tyres to the correct pressure, which is indicated on the sticker af…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos