Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Renault Megane 2 interior fan removal instructions

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Blower motor

In today's video tutorial we will see the main instructions that will allow us to remove the passenger compartment fan of a second series Renault Megane. First we get inside the car and remove the plastic bulkheads that we find at the bottom on the driver's side, unscrewing the fixing screws; after which we are going to locate the passenger compartment fan, where we are going to unscrew the fixing screws to extract it. At this point we disconnect the electrical connector and replace the fan or motor with the new one. Follow the video to the end and apply the reverse procedure for reassembly!

Posted on 30 November 2020 by ScegliAuto

Video tutorial

Related tutorials

Removing the air fan on Renault Megane
Removing the air fan on Renault Megane
Renault Megane (2002-2010 / Megane 2) Removing the air fan on Renault Megane, let's see how to proceed. The passenger compartment ventilation fan is located under the dashboard. Remove th…
Renault Megane interior blower disassembly guide
Renault Megane interior blower disassembly guide
Renault Megane (2002-2010 / Megane 2) In this short and simple guide we will see how to disassemble and replace the Renault Megane passenger compartment fan. First of all, we get on board…
How to replace the blower resistor on Renault Megane
How to replace the blower resistor on Renault Megane
Renault Megane (2002-2010 / Megane 2) We will see below the steps that will allow us to disassemble and replace the resistance of the fan in the passenger compartment of the Renault Megan…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos