Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Heater Fan from a Renault Clio?

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

Before starting, sit in the front passenger seat of your Renault Clio. Begin by deactivating the front passenger airbag using the designated side knob. Next, unscrew and remove the screws securing the glove compartment to the dashboard, also disengaging the relevant covers, and finally disconnect the internal light connector of the compartment.

Once done, you can extract the glove compartment, gaining access to the cabin fan. Proceed by disconnecting the corresponding connector, then unscrew the screws that secure it. After completing this step, you can remove the fan, and you will have finished the disassembly.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Heater Fan from a Renault Clio
How to Remove the Cabin Heater Fan from a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Before you can start, sit in the front passenger seat of your Renault Clio. Begin by deactivating the front passenger airbag using the designated sid…
How to Replace the Heater Fan on Renault Clio
How to Replace the Heater Fan on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide shows how to replace the fan on a Renault Clio. Remove the plastic cover under the front windscreen using a lever, then unscrew the cover …
How to Replace the Cabin Fan in a Renault Clio?
How to Replace the Cabin Fan in a Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this tutorial, see how to replace the cabin fan in a Renault Clio, a very simple operation. First, sit in the passenger seat, then remove the two …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos